松香改性酚醛环氧树脂的合成与表征

以松香,环氧氯丙烷,甲醛及苯酚等为主要原料,合成了一种新型的环氧树脂。通过正交实验法确定了环氧化反应的最佳实验条件,即环氧化温度90℃,碱用量13 g,催化剂为cat 1,其最佳用量为0.018 mol,环氧氯丙烷的用量为50 g,碱浓度为30%(以上数值均以松香用量为70 g时计)。在最佳实验条件下合成得到了松香改性酚醛环氧树脂(简称RAPE),并用HPLC、FT-IR、NMR对其进行结构表征。结果表明,得到的RAPE其环氧值为0.28 mol/100g,平均聚合度约为3.4,酚羟基和树脂酸上的羧基基本反应完全,得到一种新型的缩水甘油醚型和缩水甘油酯型的环氧树脂。     

Base- and light-assisted synthesis of anthracenes from 3-allylnaphthalene-2-carbaldehydes

The synthesis of substituted anthracenes from naphthalene precursors is described. The key step involved heating ortho-allyl substituted naphthalene-2-carbaldehydes and potassium t-butoxide in DMF with concomitant irradiation from a high pressure mercury lamp to afford anthracenes in yields of 76-98%.     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

Carbonat-isostere Anionen [SnX3]5− in den Verbindungen Rb6[SnX3]O0,5 und Cs6[SnX3]O0,5 mit X = As,Sb und Bi

Carbonate Isostructural Anions [SnX₃]^5? in the Compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi The metallic shining compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi were prepared from the melt starting from adequate mixtures of the elements and SnO₂. They crystallize in the hexagonal system (space group P6₃/mmc, No. 194, Z = 2) with the lattice constants mentioned in ?Inhaltsübersicht”?. In the structures of the isotypic compounds tin and the main group(V) elements build up trigonal planar anions [SnX₃]^5? with X = As, Sb, and Bi isostructural to the carbonate anion, oxygen forms isolated O^2? ions. The bond lengths Sn? X are significantly shortened with respect to the sums of Pauling covalent radii. The atoms of the units [SnX₃]^5? are coordinated by alkali metal cations forming trigonal prisms and the O^2? anions occupy octahedral holes.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

铁氧化还原蛋白在多壁碳纳米管上的固定、表征及直接电子转移

将来源于Spinacia Oleracea的铁氧化还原蛋白(ferredoxin, SOFd)固定在多壁碳纳米管(CNT)表面, 紫外-可见及红外光谱表明, SOFd在CNT表面没有变性, 仍保持原来的二级空间结构. 循环伏安结果表明, SOFd在CNT表面能进行有效和稳定的直接电子转移反应, 伏安曲线上出现一对良好的、几乎对称的氧化还原峰, 式量电位E^0'为(－570.4±1.5) mV (vs. SCE, 0.1 mol/L磷酸盐缓冲液), 且不随扫速和溶液pH值的变化而变化. SOFd直接电子转移的表观速率常数k_s为(0.73±0.04) s^－1.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

用于直接合成碳酸二甲酯的新型高活性催化剂 A Novel Highly Active Catalyst for the Direct Synthesis of Dimethyl Carbonate

 将CO2直接合成法和酯交换法相结合,通过超强碱的引入和催化剂的微粉化,制备了一种新型的负载于MgO表面的碱-金属盐路易斯酸双组分催化剂,实现了以CO2,甲醇和环氧丙烷为原料的碳酸二甲酯一步直接合成.